This item is not available for purchase online. Please call 610-788-2226 for more information.
Monoblock Class D Marine Subwoofer Amplifier, 1000 W x 1 @ 2 Ω / 600 W x 1 @ 4 Ω - 14.4V
Designed to be paired with full-range MVi amplifiers, MV monoblock subwoofer amplifiers are engineered to deliver outstanding bass performance and fidelity, with exceptional efficiency.
Equipped with an exclusive, low-frequency variant of our NexD2™ switching amplifier technology, the MV1000/1 monoblock subwoofer amplifier generates up to 600 watts into 4 ohms, or a stunning 1000 watts into 2 ohms. Housed in a compact, cast alloy chassis with marine-grade powder coat finish, the MV1000/1 is outfitted with corrosion-resistant hardware and connectors.
Instead of traditional control knobs and switches, all amplifier adjustments are configured via a compatible external device (PC, Tablet or Smartphone), with the appropriate JL Audio TüN™ Software application installed.
Amplifier includes: Power Connector (for 2 AWG wire), Subwoofer Output Harness, 6 ft A/B USB Cable
|@ 4 Ω||600 W RMS x 1|
|@ 3 Ω||800 W RMS x 1|
|@ 2 Ω||1000 W RMS x 1|
|@ 1.5 Ω||N/A|
|@ 4 Ω||500 W RMS x 1|
|@ 3 Ω||650 W RMS x 1|
|@ 2 Ω||800 W RMS x 1|
|@ 1.5 Ω||N/A|
|Frequency Response||12 Hz - 500 Hz (+0, -1dB)|
|S/N Ratio, referred to highest rated power (Analog Inputs)||87 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)|
|S/N Ratio, referred to 1 W (Analog Inputs)||60 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)|
|Damping Factor @ 4 Ω||>400 / 50 Hz|
|Damping Factor @ 2 Ω||>300 / 50 Hz|
|THD+N @ Rated Power||<1% @ 2 Ω per Ch.|
|Input Voltage Range @ RCA Inputs||250 mV - 8 V RMS|
|Min.Copper Power / Ground Wire Gauge||4 AWG wire|
|Fuse Rating||80 A (AFS, AGU or MaxiFuse™)|
|IP Rating||IPX2 (when mounted vertically with connections pointed downward)|